Set up device:

• Plug in the power source

• Plug in the network wire (Internet port)

  

• Plug in handset, headset (Note be sure to plug in the correct port).

  

Network

By default, the device will use DHCP to get the IP. To view your device's IP, please follow these steps:

Step 1: 

• Wait for the device to boot up and display the main screen

• Choose Menu on the toolbar

  

Step 2: 

• Main Menu will display

• Choose Status (or press key 1 on Dialpad)

  

Step 3: Check the IP address of the Yealink IP Phone device, as in the example image below, the IP address will be 192.168.6.137

Configure SIP account on IP Phone

With information from the device account created on AntBuddy, for example:

• Account Name: testing

• Authen ID: testing

• Authen Password: 123456

• SIP Server: qahtksungroup.anttel-pro.ab-kz-02.antbuddy.com

• Outbound Proxy: ab-kz-02.antbuddy.com

• SIP Transport: TCP

Enter this information on the Yealink T19 E2 IP Phone device by following these steps:

Step 1: 

• Access the IP address of the received IP Phone on the web browser, for example here is the address http://192.168.6.137

• Login by username and default password:

• Username: admin

• Password: admin

  

Step 2: Choose  Account section

Step 3: Enter the information shown below, after choosing Confirm button.

Step 4: After choosing Confirm button, check the updated information (Registered), as shown in the picture, you have completed configuring information on IP Phone Yealink T19 E2

Step 5: Choose PCMU and PCMA codecs as the two main codecs for the phone in Account - Codec, after pressing Confirm to save configuration

Step 6: Adjust time zone to +7 in Settings  - Time & Date , press Confirm to save configuration